
PRODUCTS / Backlit Mirrors
Arkadan Aydınlatmalı Aynalar
5 fixtures in this family. Filter by type, space or material, then bring the references into a project enquiry.
A backlit mirror solves a bathroom problem that surface-mounted fittings create: light from the side casts a shadow on the face, and light from above puts it under the eyes. Light from behind the glass is even, and it removes a fitting from the wall at the same time.
Light behind the glass
Two arrangements dominate. A perimeter diffuser gives an even halo and is the most flattering for shaving and make-up. A central backlight spreads through the mirror and reads softer, though the output at the edge drops. For a hotel bathroom, 300 lux at the face is a reasonable target with a CRI of 90 or above, and 2700 K to 3000 K to stay consistent with the guestroom.
Wet-area requirements
The mirror sits in Zone 2 in most layouts, so IP44 is the minimum and IP65 is required if it can be splashed directly. The driver must be accessible for replacement, which usually means a service hatch or a front-access design.
Size and mounting
Mirror width should match or slightly exceed the vanity width. The centre of the mirror sits at 1.6 m to 1.7 m above finished floor for a standing user, lower for a seated vanity.
Specifying
Send the vanity width, the zone layout and the switching intent. We return the mirror size, IP rating and driver arrangement.