Qilux Lighting

PRODUCTS / Surface Mounted Linear

Sıva Üstü Lineer Aydınlatmalar

1 fixtures in this family. Filter by type, space or material, then bring the references into a project enquiry.

Farklı bir boyut veya yüzey mi gerekiyor?

Her model; ölçüler, malzemeler, yüzeyler ve ışık rengi proje gereksinimlerine göre uyarlanabilir.

Kişiye Özel Aydınlatmayı Keşfedin ↗

A surface-mounted linear fitting is the answer when a ceiling cannot be opened. It sits on the soffit rather than inside it, which means no cutting, no void depth to check and no fire-rated detail to work around. In refurbishments it is often the only option that does not involve the fire strategy.

Where it works

Corridors, back-of-house routes, offices with a concrete soffit and retail runs that have to be reconfigurable. A 1200 mm fitting at 50 mm depth reads as a neat line rather than a box, provided the housing is extruded aluminium and the diffuser is frosted rather than clear.

Output and spacing

Continuous runs are usually specified at 15 W to 20 W per metre for office corridors and 25 W to 30 W per metre where a higher lux level is needed. For uniform light, centres should be no more than 1.5 times the mounting height apart.

Suspension or surface

If the ceiling is high and the room needs a lower visual datum, the same housing can usually be suspended on a 1 m or 1.5 m drop. Confirm the fixing and the drop before ordering; the two versions are different kits, not the same fitting with different brackets.

Teknik özelliklerin belirlenmesi

Send the run length, the ceiling substrate and the target lux. We return a layout with the number of fittings, the driver positions and the dimming protocol.