Qilux Lighting

PRODUCTS / Track Lighting Systems

Raylı Aydınlatma Sistemleri

9 fixtures match these filters.

Track lighting is the only system that lets a scheme change after handover without touching the ceiling. That flexibility is worth its visible hardware in retail, galleries, restaurants and any space where the merchandising or the layout will move.

Why specify track

A fixed downlight is committed to one aim for its service life. A track head can be re-aimed, swapped, added or removed in minutes by the operations team. In a retail unit that re-merchandises quarterly, or a restaurant that rotates its art, this is the difference between a lighting plan that survives and one that is bypassed.

Circuits and adapters

Three-circuit track carries three independent switching or dimming groups on one rail, which is what makes scene setting possible: display lit, circulation dimmed, cleaning mode at full output. Adapters are manufacturer-specific in practice even when the profile looks standard, so the rail and the heads should come from one source. Single-circuit is cheaper and adequate for a small retail box.

Choosing the head

Spot heads at 15 to 24 degrees for accent and display; flood heads at 36 to 60 degrees where a broader wash is needed. Colour quality decides the merchandising: CRI 90 and R9 above 50 for textiles, food and skin tones, because a high-CRI fitting that renders red badly makes a garment look dirty. Beam shaping accessories, snoots and barn doors, control spill in low-ceiling rooms.

Aiming

Aim at the object, not the floor. The standard is to set the head at roughly 30 degrees from vertical so that the light strikes the display face rather than the top, and to keep the source out of the customer's sightline at eye height. In a restaurant, aim at the table surface and leave the surrounding floor dark; uniform brightness is what makes a dining room feel like a canteen.

Where it works best

Retail floors, galleries, bars and restaurants, reception and showroom areas, and any hospitality space with a changing display. It is a poor fit for guestrooms and corridors, where a fixed downlight is cheaper, quieter in appearance and less likely to be mis-aimed by a guest.

Mounting and power

Surface, suspended and recessed track are all available; recessed track is the choice where the rail should disappear. Total load per circuit is limited by the track rating, typically 16 A, and the feed point should be planned with the ceiling layout rather than added after the plaster is up.